What is a down-the-hole drilling rig

A down-the-hole drill, usually called DTH by most professionals, is basically a jackhammer screwed on the bottom of a drill string. The fast hammer action breaks hard rock into small cuttings and dust that are evacuated by a fluid (air, water or drilling mud). The DTH hammer is one of the fastest ways to drill hard rock. The system is thought to have been invented independently by Stenuick. Origin of the nameDTH is short for “down-the-hole”. Since the DTH method was originally developed to drill large-diameter holes. . In DTH drilling, the percussion mechanism – commonly called the hammer – is located directly above the drill bit. The drill pipes transmit the necessary feed force and rotation to the hammer and the bit, along with the flui. . A is first thought to have been used for rock drilling in 1844. Many quarries used hand held tools that required the driller to suspend himself from a rope over the quarry face in order to place the drill hole in. [pdf]

Crawler DTH Drilling Rig Configuration and Structure

1. Prepare the rock-drilling cavern, the specifications of which can be determined according to the method of drilling. Generally speaking, the height of the cavity is 2.6-2.8 meters when drilling a horizontal hole with a down-the-hole drill. When drilling upward, downward, or inclined holes, the width of the cavity is. . 1. When starting to work, carefully check whether the gas and water pipelines are firmly connected. Check for air leaks and water leaks. 2. Check whether the lubricator has been. . When opening the hole, start the motor first, and pull the push handle of the manipulator after the transfer is normal. Make it get proper. [pdf]

What to do if the rock drill gets hot

First, safely remove the bit from the drill—use a cloth or gloves to avoid direct contact with the overheated metal. Inspect the bit for any visible damage such as discoloration or warping. If the bit appears to be damaged, it’s best to replace it.. First, safely remove the bit from the drill—use a cloth or gloves to avoid direct contact with the overheated metal. Inspect the bit for any visible damage such as discoloration or warping. If the bit appears to be damaged, it’s best to replace it.. Stop Using the Drill: As soon as you notice the drill overheating, stop using it immediately. Continuing to use it can cause damage to the tool and increase safety risks. Disconnect Power: Unplug the drill from the power supply.. Overheating in drills is more serious than it sounds, and you should know the correct ways to fix your tool fast. The easiest and most common ways to cool down the drill include changing the drill bit and lubricating it. It is likely time to change your drill bit when it gets full. [pdf]