Sullair is the world's largest manufacturer of rotary screw air compressors. It was founded in 1965 and headquartered in Michigan City, Indiana, USA. As a pioneer in the compressor field, Sullair's manufacturing technology which applies to rotary screw air compressors has reached a top level. Furthermore, Sullair. .
We can select the type and brand of drilling compressor corresponding to the volume flow and pressure according to the drilling diameter and drilling depth. Sullair's high quality air compressors offer reliable performance and provide you with stable and uninterrupted. .
Oil and gas gathering is the process of collecting the recovered fluid or natural gas and associated gas produced from each well in an oil and gas field, separating and. .
Sullair is a drilling rig manufacturing company specializing in the development and production of various high-performance and economical series of submersible drilling. .
A drilling air compressor supplies compressed air to the drilling air control system. It is also used as a power source to drive the engine's starter motor, Kelly rotator and power clamp. Piston (reciprocating) air compressors are usually used on different.
[pdf] 1. Prepare the rock-drilling cavern, the specifications of which can be determined according to the method of drilling. Generally speaking, the height of the cavity is 2.6-2.8 meters when drilling a horizontal hole with a down-the-hole drill. When drilling upward, downward, or inclined holes, the width of the cavity is. .
1. When starting to work, carefully check whether the gas and water pipelines are firmly connected. Check for air leaks and water leaks. 2. Check whether the lubricator has been. .
When opening the hole, start the motor first, and pull the push handle of the manipulator after the transfer is normal. Make it get proper.
[pdf] 
DTH is short for “down-the-hole”. Since the DTH method was originally developed to drill large-diameter holes downwards in surface-drilling applications, its name originated from the fact that the percussion mechanism followed the bit down into the hole. Applications were later found for the DTH method. .
A down-the-hole drill, usually called DTH by most professionals, is basically a screwed on the bottom of a . The fast hammer action breaks hard rock into small cuttings and dust that are evacuated by a. .
A is first thought to have been used for rock drilling in 1844. Many quarries used hand held tools that required the driller to suspend himself from a rope over the. .
In DTH drilling, the percussion mechanism – commonly called the hammer – is located directly above the drill bit. The drill pipes transmit the necessary feed force and rotation to the hammer and the bit, along with the fluid (air, water or drilling mud) used to. .
DTH products can be used in the following applications:• Mining- drill and blast holes in open pit mining, where the drill operator will drill several holes, then. Down the Hole Hammer (DTH) is a versatile horizontal drilling method, capable of tunneling through the toughest soil types and rock formations. DTH can break through cobbles, boulders, and even solid rock — which allows our team to complete installations in otherwise impenetrable ground conditions.
[pdf] 