The longer your feed rail, the more important the addition of the energy chain becomes to the overall effectiveness of your machine. We. .
A common addition whenever a unit is equipped with a Doofor drilling motor, hydraulic clamp, or hydraulic breaker; this accessory comes in handy for routine maintenance of any. .
A very helpful accessory whenever you are operating with casing, the addition of a hydraulic clamp and clamp breaker to your machine saves your. .
Making this accessory addition to your excavator or skid steer drilling attachment can really boost efficiency on the job site when dealing with. .
An easy add-on to any excavator attachment purchase, the addition of angle indication to your remote will provide you with a digital readout of your drill positioning. This feature is particularly beneficial when you are on a job that requires specific.
[pdf] 
Before we dive into the installation process itself, we will discuss the potential location of your EDV and why those locations will help with system efficiency. To increase both operational flow and efficiency, drains should be placed in the following locationsfor a compressed air system in your workshop: 1. on. .
Depending on your application, you can choose to install an EDV without the optional mounting kit. It's important to note that installing a. .
First, let’s define the ON and OFF times. The ON dial refers to how long the drain valve will stay open (0.5 to 10 seconds), discharging water. The OFF dial refers to the time between. .
While there are other types of drains available for commercial compressed air systems, it’s important to keep the benefits of having an EDV in mind. Installing an EDV not only. .
Be aware of potential problems that can occur with your compressed air system, which indicates a new EDV would be a smart investment. These include: 1. repeated occurrences of the air compressor turning on and off. 2. air leaks around the drain.
[pdf] A down-the-hole drill, usually called DTH by most professionals, is basically a jackhammer screwed on the bottom of a drill string. The fast hammer action breaks hard rock into small cuttings and dust that are evacuated by a fluid (air, water or drilling mud). The DTH hammer is one of the fastest ways to drill hard rock. The system is thought to have been invented independently by Stenuick. Origin of the nameDTH is short for “down-the-hole”. Since the DTH method was originally developed to drill large-diameter holes. .
In DTH drilling, the percussion mechanism – commonly called the hammer – is located directly above the drill bit. The drill pipes transmit the necessary feed force and rotation to the hammer and the bit, along with the flui. .
A is first thought to have been used for rock drilling in 1844. Many quarries used hand held tools that required the driller to suspend himself from a rope over the quarry face in order to place the drill hole in.
[pdf] 
