A down-the-hole drill, usually called DTH by most professionals, is basically a jackhammer screwed on the bottom of a drill string. The fast hammer action breaks hard rock into small cuttings and dust that are evacuated by a fluid (air, water or drilling mud). The DTH hammer is one of the fastest ways to drill. .
DTH is short for “down-the-hole”. Since the DTH method was originally developed to drill large-diameter holes downwards in surface-drilling. .
A is first thought to have been used for rock drilling in 1844. Many quarries used hand held tools that required the driller to suspend himself from a rope over the. .
In DTH drilling, the percussion mechanism – commonly called the hammer – is located directly above the drill bit. The drill pipes transmit the necessary feed force and rotation to the hammer and the bit, along with the fluid (air, water or drilling mud) used to. .
DTH products can be used in the following applications:• Mining- drill and blast holes in open pit mining, where the drill operator will drill several holes, then.
[pdf] 1. Prepare the rock-drilling cavern, the specifications of which can be determined according to the method of drilling. Generally speaking, the height of the cavity is 2.6-2.8 meters when drilling a horizontal hole with a down-the-hole drill. When drilling upward, downward, or inclined holes, the width of the cavity is. .
1. When starting to work, carefully check whether the gas and water pipelines are firmly connected. Check for air leaks and water leaks. 2. Check whether the lubricator has been. .
When opening the hole, start the motor first, and pull the push handle of the manipulator after the transfer is normal. Make it get proper.
[pdf] 
Waterwell drilling is essentially drilling for underground water for agricultural and residential water needs. A perfect waterwell drilling setup would include: - A drill rig system which includes DTH hammer, DTH bit and drill tubes - Reliable skid mounted diesel air compressor.
Waterwell drilling is essentially drilling for underground water for agricultural and residential water needs. A perfect waterwell drilling setup would include: - A drill rig system which includes DTH hammer, DTH bit and drill tubes - Reliable skid mounted diesel air compressor.
When drilling a water well through the hard rock, no drilling method is as efficient as a DTH Hammer energized by the right air compressor providing high enough pressure. Softer grounds may also be drilled by air flushed rotary drilling, demanding a lower pressure air..
Air pressure requirement: The air compressor must provide sufficient air pressure to overcome the formation resistance encountered by the drill bit and maintain the drilling force. Typical air compressor pressures range from 7-30 bar (100-450 psi).
[pdf] 