Crawler DTH Drilling Rig Configuration and Structure

1. Prepare the rock-drilling cavern, the specifications of which can be determined according to the method of drilling. Generally speaking, the height of the cavity is 2.6-2.8 meters when drilling a horizontal hole with a down-the-hole drill. When drilling upward, downward, or inclined holes, the width of the cavity is. . 1. When starting to work, carefully check whether the gas and water pipelines are firmly connected. Check for air leaks and water leaks. 2. Check whether the lubricator has been. . When opening the hole, start the motor first, and pull the push handle of the manipulator after the transfer is normal. Make it get proper. [pdf]

Principle diagram of rock drilling machine

A cutting process that involves spinning a drill bit to create a circular hole in solid materials is known as drilling. The drill bit is typically a multi-point rotary cutting tool. The bit is pressed against the workpiece and rotated at speeds between several hundred and several thousand revolutions per minute. This. . A high-precision hole-finishing procedure carried out with a multi-edge tool is known as reaming. High penetration rates and shallow cuts involved in the reaming process enable close. . A cutting process that entails enlarging an existing hole in a workpiece with a single-point cutting tool or boring head is known as boring.. . The process of enlarging one end of the hole giving it a conical shape is called countersinking. Countersinking creates a V-shaped edge near the hole's surface. It is frequently employed for deburring drilled or tapped holes, and to ensure fasteners sit tightly in the. . The process of enlarging a hole over a particular section in the workpiece for screw clearance using counterboring tools is known as counterboring. This creates a shallow and enlarged. [pdf]

Down-the-hole drill without crawler

A down-the-hole drill, usually called DTH by most professionals, is basically a screwed on the bottom of a . The fast hammer action breaks hard rock into small cuttings and dust that are evacuated by a fluid (air, water or ). The DTH hammer is one of the fastest ways to drill hard rock. The system is thought to have been invented independently by Stenuic. This method utilizes a unique hammer drilling system where the percussion mechanism is located directly behind the drill bit at the bottom of the hole. The system consists of three main components: a drill bit, a hammer mechanism, and drill pipes. [pdf]